To update Samsung Devices or to flash firmware manually on Samsung you need to Download ODIN tool. Samsung Odin is the ROM Flashing Tool which allows flashing CF-Root kernels or a custom recovery on the Samsung devices. Without this tool you can’t flash anything on your phone, ODIN is a lightweight tool for all the Samsung users, Unfortunately, the Odin flash tool only available to the Windows-based computer. So every time when you have to ROOT / Unroot / Restore Stock ROM on Samsung Android Devices you need to download ODIN for PC.

• Odin Pda Slot
• Odin Clothing Store

Head back to the Odin application. Click on the 'BL' button, then choose the file that starts with 'BL' inside your extracted firmware folder. Next, click on the 'AP' button in Odin and choose the AP file inside your extracted firmware folder. Click on the 'CP' button, choose the CP file inside your extracted firmware folder. Download the zip file and extract it. Go to the extracted folder and double-click on “Odin3 v3.13.1.exe” file. This will launch the new Odin software. If you have already downloaded the firmware, put the respective files on the available slots (BL, AP, CP, CSC), put the phone to download mode, connect it to the PC and start flashing. The “CP” button is to flash Individual Section called modem in can be found in firmware. We can flash modem part of the firmware in this option.This button was previously labeled as “Phone”. In old firmware we will see this as Modem, Phone and in new firmware is CP. Example can be seen below in how to use odin3 part of this post. AP represents the system partition (possibly stands for Android partition); under previous Odin versions, this was called 'PDA' CP represents your modem; CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier.

If you own a Samsung phone or tablet, then you know about this ODIN tool and how to use is on your windows. If not, then don’t worry here we will explain to you how to Download ODIN on Windows PC, how to use ODIN tool and how to flash the firmware with ODIN tool. So read our full guide and know how this tool works and what are the benefits of using this tool on your Windows PC.

Table of Contents

• 1 Download Odin for Samsung

Benefits of Samsung ODIN Tool

• Flash Stock Firmware – With the help of Odin too, you can easily Flash official stock firmware on your Samsung Device. All you need a Firmware zip file and have to flash the same with the ODIN app.
• Flash Custom Firmware (Flashing Custom ROM) – If you have the rooted Samsung Phone and want to install some custom Firmware, then again you need this file to install the same
• Flash Recovery File (TWRP) – In rooted phone, if you want to install Custom Recovery like TWRP or CWM then again this will help you to flash your favorite custom recovery.
• Flash Kernels ( .tar/.zip/.img) – Flashing Stock or Custom Kernels is possible. Notice, you must have Odin flashable custom kernel (.tar) and compatible with your android device.
• Flash Root Package (MD5 and .tar files) – Odin can Flash custom root packages like CF-Root to root the phone.

Requirement To Download ODIN to PC

There are few important things you must care about before proceeding with Odin Download. Otherwise, you’ll face some error at the time of Flashin in ODIN.

– Download Odin latest version available from the below mention links.

– Have updated Samsung USB drivers installed on Your Windows PC. Download Samsung USB drivers here.

– Download ADB Fastboot from here. This will help you to send ADB commands from your Desktop to Samsung Device.

– Have a proper USB cable to connect the device with the Windows Computer.

Download Odin for Samsung

The latest version “odin 3.12.7” released with important improvements and custom kernels. This one is the latest version of ODIN tool and works on all Samsung Devices.

Odin download earlier versions

Download the Odin_3.10.0.rar
Download the Odin3_v3.10.5.zip
Download the Odin3_v3.10.6.zip
Download the Odin3_v3.10.7.zip
Download the Odin3_v3.11.1.rar
Download the Odin3_v3.12.3.zip

How to use ODIN on Samsung Devices

1. Download the Latest ODIN tool from the above mention link and run the same on your Windows PC.

2. Now boot your Samsung device in download mode. To do this Turn off your device and then press and hold Volume Down + Home + Power buttons simultaneously for 2-3 seconds.

3. Connect your phone to the PC with USB cable, and now you will see the ID: COM port on Odin will turn Blue or Yellow depending on the Odin version.

4. Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“ in the Options tab of ODIN tool.

5. Now click the AP button and select the files that you have to flash/install on your phone. (In case you got a multi-file firmware with AP, BL, CP, CSC, and.PIT files, then use the AP, BL, CP Slots to add those files on ODIN)

6. Now click ‘Start‘ button to start the flashing process. Wait until you see ‘Pass‘ in Green Color on Odin screen.

That’s it. With this way you can use ODIN tool on your Windows PC and Flash firmware on Samsung devices using Odin. Leave your experiences and issues with the tool in the comment section below.

Download Odin3 v3.10.6 flasher tool for Galaxy S6 and Galaxy S6 Edge devices. This is the suitable Odin3 version for flashing a stock firmware on all Galaxy S6 and Galaxy S6 Edge version without getting fails.

Download Odin version for Galaxy S6, S6 edge, and S6 edge+

Odin3_v3.12.3	(download)
Odin3_v3.11.1	(download)
Odin3_v3.10.7	(download)
Odin3_v3.10.6	(download)

USB Driver for Galaxy S6, S6 edge, and S6 edge+

You also need the USB driver since using Odin flasher involves a connection between the PC and the phone. You should install it beforehand so that your PC can recognize the phone.

v1.5.51	Download
v1.5.49	Download
v1.5.45	Download
v1.5.33	Download

Proper Use of Odin3_v3.10.6

The Odin3 v3.10.6 can be use to restore back the Galaxy S6 and Galaxy S6 Edge to its original and official firmware. It can directly install a stock firmware either it comes in single and multiple tarball packages It can also be use to install an individual stock firmware packages such AP, CSC, Bootloader, Modem, Stock Recovery, Stock Kernel and even a modified system images.

Flashing single stock firmware package on Odin3_v3.10.6

If the stock firmware only comes in single binary file (.tar.md5) it can be loaded in Odin3’s AP slot. This also applies on other system images such stock recovery and the stock kernel.

Flashing Multiple stock firmware packages in Odin3_v3.10.6

Some stock firmware which comes in individual binary packages such as it Bootloader, AP, CSC, Modem and sometimes including a PIT file. You may only load each specific packages in Odin3's reserved buttons.
BL = Bootloader or a Boot image
AP = AP file or a Phone image
CP = CP file or a Modem image

Odin Pda Slot

CSC = CSC file or the consumer code

Odin Clothing Store

Reboot the Galaxy S6 and Galaxy S6 Edge in Download mode:

To be able to use Odin3_v3.10.6 properly you must set your Galaxy S6 or Galaxy S6 Edge in 'Download Mode' screen. To activate the device in download mode follow this steps:
1) Turn off the phone.
2) Press and Hold the Volume Down, Home and Power button at the same time.
3) Press Volume Up to enter the device in Download Mode.

Enable USB debugging mode in Galaxy S6 and Galaxy S6 Edge

You may also need to enable the USB debugging mode in your Galaxy S6 and Galaxy S6 Edge. This is a basic function of an Android device that facilitate its connection to a computer. You can simply navigate this option in the device Settings>>Developer option>>USB debugging, then simply tick the box to enable it.

Install the Galaxy S6 and Galaxy S6 Edge USB Driver

To ensure that Odin3_v3.10.6 will work well accordingly, you must also install the proper USB driver for Galaxy S6 and Galaxy S6 Edge. Without the proper USB driver, your computer will not be able to recognize your Galaxy S6 and Galaxy S6 Edge.

Odin3 Failed Error While Flashing

If Odin fails while flashing the stock firmware, this is mostly caused by a bad USB data cable. As long as you have properly installed the USB driver, you must check your USB data cable if it still in good condition. You may also try another PC and laptop, if somehow the Odin3_v3.10.6 still fails.